||2500 mm x 1.6 mm (8ft x 16g)
|96” (8-foot) length with a maximum capacity of 16 gauge mild steel.
|Clamping force (with standard full-length clampbar)
||12Tons is consistent across the entire beam, allowing for crisp bends even in the
middle of the brake.
||HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication
Making enclosed boxes, triangles, alternate bends on varying planes, and round
items such as scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless steel,
aluminum, coated materials, heated plastics,and more.
||1 phase, 220/240 V ac and will work at virtually any site.
|Max. Clamping Bar Lift
|Max. Capacity with Extension
||18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
|Max. Capacity without Extension
||16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
||2.7m x 0.38m x 0.32m = 0.3m3
|Blade gap adjustment
||Blade gap adjustment on the clamping bars lets you work with sheet metal of
|adjustable back gauges
||Comes with product supports and adjustable back gauges for production runs.
|Scaled stroke angle control
||lets you deliver repeatable bends time after time.
||Capacities can change depending on set up leaf extension. Rule of thumb for
mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner,
||1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your
fingers safely out of the machine and you to reposition the material.
4. Lift the the bottom bending leaf to complete the bend and repositioned ready
for another bend.
||1. allows you to create fully enclosed ducts and shapes impossible to make with
a traditional box and pan brake.
2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to
almost any depth,since it isn't reliant on conventional finger depths.
||include a storage tray, adjustable backstops, A full-length clamp-bar,and a
complete set of short-length clamp-bars.
||available for these models include a narrow clampbar, a slotted clampbar for
forming shallow boxes more quickly
||Special tooling can be quickly improvised from pieces of steel to help fold-up
difficult shapes, and for production work the standard clampbars can be replaced
by specialised tooling
||Operator Safety is enhanced by a two-handed electrical interlock that ensures a
safe pre-clamping force is applied before full clamping occurs.