| Nominal capacity |
1250 mm x 1.6 mm (4ft x 16g) |
| 48” (4-foot) length with a maximum capacity of 16 gauge mild steel. |
| Clamping force (with standard full-length clampbar) |
6 Tons is consistent across the entire beam, allowing for crisp bends
even in the middle of the brake. |
| Recommended for |
HVAC shops,Tech schools, industrial art shops, and general sheet
metal fabrication shops.
Making enclosed boxes, triangles, alternate bends on varying planes,
and round items such as scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless
steel, aluminum, coated materials, heated plastics,and more. |
| Eletrical Supply: |
1Phase & Pneumatic air supply, 220/240 V ac and will work at virtually
any site. |
| Nominal current: |
8 Amp |
| Duty cycle: |
30% |
| Box Depth |
Unlimited |
| Bend Angle |
0-180° |
| Max. Clamping Bar Lift |
Unlimited |
| Max. Capacity with Extension |
18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel |
| Max. Capacity without Extension |
16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel |
| Thermal Cut-Out |
158°F (70°C) |
| Shipping dimensions |
1.47m x 0.95m x 1.14m = 1.59m3 |
| GW/NW |
250kg/230kg |
| Blade gap adjustment |
Blade gap adjustment on the clamping bars lets you work with sheet
metal of different thicknesses. |
| adjustable back gauges |
Comes with product supports and adjustable back gauges for
production runs. |
| Scaled stroke angle control |
lets you deliver repeatable bends time after time. |
| Notes |
Capacities can change depending on set up leaf extension. Rule of
thumb for mild steel, 16ga., extension OFF. 18ga. extension On or
Off, 20ga. and thinner, extension On. |
| Easy operation |
1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button
control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps
your fingers safely out of the machine and you to reposition the material.
4. Lift the the bottom bending leaf to complete the bend and repositioned
ready for another bend. |
| open-ended design |
1. allows you to create fully enclosed ducts and shapes impossible to make
with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to
almost any depth,since it isn't reliant on conventional finger depths. |
| Standard accessories |
include a storage tray, adjustable backstops, A full-length clamp-bar,and a
complete set of short-length clamp-bars. |
| Optional accessories |
available for these models include a narrow clampbar, a slotted clampbar
for forming shallow boxes more quickly |
| Special tooling |
Special tooling can be quickly improvised from pieces of steel to help fold-up
difficult shapes, and for production work the standard clampbars can be replaced
by specialised tooling |
| Operator Safety |
Operator Safety is enhanced by a two-handed electrical interlock that ensures a
safe pre-clamping force is applied before full clamping occurs. |